Guardian Textile Protector easily and effectively protects furniture with fabric upholstery and can be used on all types of textiles, both indoors and outdoors. The product does not alter the natural properties, appearance and breathability of the fabric, but provides invisible protection and reduces fading (UV protection). 

Spray the product on the surface from a distance of approx. 25 cm so that the fabric gets "wet". It is recommended that entire surfaces are always treated. In case of spillage, wipe up the spillage immediately. Drying time is approx. 4 hours at normal room temperature. Full effect is achieved after 24 hours drying time. If the fabric develops white "shadows", these are easily brushed off with a wrung cloth. Always test the product on a non-visible spot before use. Keep out of reach of children. The product is manufactured with nitrogen as a propellant for environmental and safety reasons.

Guardian Textile Protector easily and effectively protects furniture with fabric upholstery and can be used on all types of textiles, both indoors and outdoors. The product does not alter the natural properties, appearance and breathability of the fabric, but provides invisible protection and reduces fading (UV protection). 

Spray the product on the surface from a distance of approx. 25 cm so that the fabric gets "wet". It is recommended that entire surfaces are always treated. In case of spillage, wipe up the spillage immediately. Drying time is approx. 4 hours at normal room temperature. Full effect is achieved after 24 hours drying time. If the fabric develops white "shadows", these are easily brushed off with a wrung cloth. Always test the product on a non-visible spot before use. Keep out of reach of children.

Guardian Textile Cleaner, a unique cleaning agent used to remove stubborn water and oil-based stains and can be used on all types of textiles, including microfibre. The product can be used both indoors and outdoors and contains no bleach.

1. Always test the product in an inconspicuous place (colour fastness).

2. Always soak up as much of the spillage/stain as possible with a dry absorbent cloth before using Guardian Textile Cleaner.

3. Spray Guardian Textile Cleaner directly onto the stain and activate the cleaner with a soft brush or sponge. In some cases, a light foam will form.

4. Soak up the cleaner and the dirt/stain with an absorbent material (tea towel, paper towel or similar). If necessary, dry gently with a hairdryer and then vacuum.

5. To avoid stains, it is important that all Textile Cleaner is absorbed from the textile.

6. For difficult stains, repeat the above treatment.

7. When the textile is completely dry, it can be treated with Guardian Textile Protector.

Guardian Foam Cleaner is specially developed to clean and sanitise all types of textiles – can also be used on carpets. The product effectively removes stains from coffee, red wine, soft drinks, jam, fruit, berries and the like. 

Spray the product directly onto the stain or area to be cleaned from a distance of approx. 25 cm and then massage the foam into the textile with clean fingers (use a soft lint-free cloth or a soft sponge, if necessary). Let the product/foam "rest" for approx. 2 minutes and then wipe with a soft, lint-free cloth wrung in clean water. For difficult stains, repeat the treatment and allow the product/foam to "rest" for 6-8 minutes before wiping. 

Guardian Textile Protector can be used after the treatment with Guardian Foam Cleaner. Shake the product before use. Always test the product on a non-visible spot before to use.

Guardian Anti Static effectively removes and prevents static electricity on textiles. It can be used on all types of textiles where static electricity occurs. 

Spray the product on the surface from a distance of approx. 25 cm so that the textile gets "wet" and let it dry. It is recommended that entire surfaces are always treated. Shake the product before use. Always test the product on a non-visible spot before use.

Guardian Fire Protector is fire retardant and can be used on all absorbent materials, natural and synthetic, including textiles, paper, cardboard, cardboard and plants. 

Spray the product onto the item from a distance of approx. 25 cm so that it becomes "wet". It is recommended that entire surfaces are always treated. Allow the treated item to dry for a minimum of 180 minutes at a minimum of 20°C. If the fabric develops white "shadows", these are easily brushed off with a wrung cloth. 

New materials are often introduced to the market, so always test the product's effect on the material before actual treatment. 

Shake the product before use. Always test the product on a non-visible spot before use.

Guardian Velour & Nubuck Brush is designed to maintain and clean velours and nubuck leather. 

Open the casing and gently brush the surface in the same direction – never rub! Always test the product on a non-visible spot before use.

Guardian Leather Protector is for the protection and care of leather types with rough and napped surfaces such as suede, nubuck, and the like. The product does not alter the natural properties, appearance and breathability of the leather, but provides invisible protection. 

Spray the product on the surface from a distance of approx. 25 cm so that the leather gets "wet". It is recommended that entire surfaces are always treated. In case of spillage, wipe up the spillage immediately. Drying time is approx. 6 hours at normal room temperature. Full effect is achieved after 24 hours drying time. If the leather develops white "shadows", these are easily brushed off with a wrung cloth. Shake the product before use. Always test the product on a non-visible spot before use.

Guardian Leather Cleaner is used to clean aniline, semi-aniline and top-dyed leather (smooth leather types). 

Apply Guardian Leather Cleaner with a soft lint-free cloth or a soft sponge and wash the leather with massaging circular movements with light pressure - do not rub. It is important that the leather is evenly "wet" and that the entire surface is always cleaned, otherwise discolouration may occur. When the leather is completely dry, it should be treated with Guardian Leather Conditioner (Guardian Leather Conditioner). 

It is recommended that leather furniture is treated with Guardian Leather Cleaner and Guardian Leather Conditioner 4-6 times a year. Shake the product before use. Always test the product on a non-visible spot before use.

Guardian Leather Conditioner is for the maintenance of aniline, semi-aniline and top-dyed leather (smooth leather types) and protects the natural properties of the leather and reduces the risk of desiccation, scratching and fading. 

Apply Guardian Leather Conditioner with a soft lint-free cloth or a soft sponge using light massaging circular motions. It is important that the leather conditioner is applied evenly and that entire surfaces are always treated. Some colours may take on a slightly deeper, darker shade. It is a good idea to use Guardian Leather Cleaner before treating with Guardian Leather Conditioner. 

It is recommended that leather furniture is treated with Guardian Leather Cleaner and Guardian Leather Conditioner 4-6 times a year. Shake the product before use. Always test the product on a non-visible spot before use.

Guardian Leather Conditioner with extra wax is specially developed for the care and maintenance of waxed aniline leather. The leather conditioner protects the natural properties of the leather and reduces the risk of desiccation, scratching and fading. 

Apply Guardian Leather Conditioner with a soft lint-free cloth or a soft sponge using light massaging circular movements. It is important that the leather conditioner is applied evenly and that entire surfaces are always treated. Some colours may take on a slightly deeper, darker shade. 

It is recommended that furniture fitted with waxed aniline leather is treated with Guardian Leather Conditioner with extra wax 4-6 times a year. Shake the product before use. Always test the product on a non-visible spot before use.

Guardian Leather Soap is for the care of bonded leather, corrected leather, regenerated leather, PU leather and similar. The product cleans and nourishes the surface. 

Apply Guardian Leather Soap with a soft lint-free cloth or a soft sponge with light massaging circular movements in an even, thin layer and let it "rest" for approx. 10 minutes. It is recommended that entire surfaces are always treated. Follow by wiping the leather with a soft, lint-free cloth, hard-wrung in clean water and allow the surface to dry. Some leathers may take on a slightly deeper, darker colour. 

It is recommended to use Guardian Leather Soap 4-6 times a year. Shake the product before use. Always test the product on a non-visible spot before use

Guardian Leather Colour, available in more than 60 different colors, is for re-colouring cracked and faded leather and can be used on smooth leather types. 

First clean the leather thoroughly with Guardian Leather Cleaner. When the leather is completely dry, apply Guardian Leather Colour with a soft lint-free cloth or a soft sponge with light massaging circular movements in an even, thin layer. In particularly worn areas, it can be dabbed on with advantage. 

It is recommended that entire surfaces are always treated. Leather does not absorb evenly, which is why it will often be necessary to apply another even thin coat of Guardian Leather Colour when the leather colour is completely dry, and after 24 hours at the earliest (can be repeated if necessary). After 3 days, finish with Guardian Leather Conditioner. Shake the product before use. Always test the product on a non-visible spot before use.

Guardian Ink & Lipstick Remover is water-based and made to remove ink and lipstick stains from “smooth” types of leather Gently rub the product directly over the spot a few times. 

Once you see the ink or lipstick start to dissolve, use a soft cloth to wipe away both the ink remover and ink mark or lipstick. Repeat if necessary. 

After the product is used, the leather should be treated with Guardian Leather Cleaner and Guardian Leather Conditioner. Always test the product on a non-visible spot prior to use

Guardian Soap Flakes are made from palm kernel oil and coconut oil, do not contain perfume, colour, optical brightener or bleach, and is the "old-fashioned way" to care and maintain both leather and wood furniture. 

1 cup of soap flakes (1 dl) is mixed in 5 litres of warm water (approx. 30°) and whisked until all the soap flakes are dissolved. 

LEATHER: Apply the mixture with a soft, lint-free cloth, lightly wrung, using massaging circular movements with light pressure - do not rub. It is important that the leather is evenly "wet" and that the entire surface is always treated, otherwise discolouration may occur. If the soap mixture leaves a matt film, polish with a dry, soft, lint-free cloth. 

WOOD: Apply the mixture with a soft lint-free cloth, lightly wrung, in a uniform thin layer in the grain direction of the wood and allow to dry. It is recommended that entire surfaces are always treated. Repeat the treatment if the wood does not appear saturated. When the wood is completely dry, if the wood has risen and become rough, sand lightly in the grain direction with fine sandpaper (220 grit). If treating solid worktops, the treatment should be applied to both the top and underside. Always test the product on a non-visible spot before use.

Guardian Wood Cleaner is based on natural soaps and is specially developed for effective cleaning and degreasing of all unvarnished indoor wood surfaces. Guardian Wood Cleaner is mixed in clean lukewarm water in a 1:1 ratio. For very dirty furniture, it can be used in a concentrated form.

Apply the product to the wood with a soft, lint-free cloth or a soft sponge in a thin, even layer in the grain direction of the wood with light pressure so that the cleaner foams. It is recommended that entire surfaces are always treated. Let the product/foam "rest" for approx. 5 minutes and then wipe with a soft, lint-free cloth wrung in clean water. When the wood is completely dry, if the wood has risen and become rough, sand lightly in the grain direction with fine sandpaper (220 grit). 

After using Guardian Wood Cleaner, the wood should be treated with wood soap, wax or oil. Shake the product before use. Always test the product on a non-visible spot before to use.

Guardian Wood Soap Natural is used to treat and protect untreated and soap-treated wooden furniture where the natural appearance of the wood is to be preserved. The product can be used on all types of wood, is made from palm kernel oil and coconut oil and contains no preservatives, optical brighteners, bleach or similar. 

Start by wiping the furniture surface with a soft lint-free cloth, hard-wrung in clean water, in the grain direction of the wood. Apply the Guardian Wood Soap Natural with a soft, lint-free cloth or a soft sponge in an even, thin layer in the grain direction of the wood. It is recommended that entire surfaces are always treated. 

Allow the product to "rest" for approx. 10 minutes and then wipe off any excess Wood Soap with a soft, lint-free cloth in the grain direction of the wood. Repeat the treatment if the wood does not appear saturated. When the wood is completely dry, if the wood has risen and become rough, sand lightly in the grain direction with fine sandpaper (220 grit). 

If treating solid worktops, the treatment should be applied to both the top and underside. It is a good idea to use Guardian Wood Cleaner (Guardian Wood Cleaner) before treating with Guardian Wood Soap Natural. 

It is recommended that soap-treated furniture is treated with Guardian Wood Soap 4-6 times a year. Shake the product before use. Always test the product on a non-visible spot before use.

Guardian Wood Soap White-Pigmented is used to treat and protect untreated and soap-treated wooden furniture where a whitewash is desired, or to care for already white-pigmented soap-treated furniture. 

The product can be used on all types of wood, is made from palm kernel oil and coconut oil and contains no preservatives, optical brighteners, bleach or similar. Start by wiping the furniture surface with a soft lint-free cloth, hard-wrung in clean water, in the grain direction of the wood. 

Apply the Guardian Wood Soap White-Pigmented with a soft, lint-free cloth or a soft sponge in an even, thin layer in the grain direction of the wood. It is recommended that entire surfaces are always treated. Allow the product to "rest" for approx. 10 minutes and then wipe off any excess Wood Soap with a soft, lint-free cloth in the grain direction of the wood.

Repeat the treatment if the wood does not appear saturated. When the wood is completely dry, if the wood has risen and become rough, sand lightly in the grain direction with fine sandpaper (220 grit). If treating solid worktops, the treatment should be applied to both the top and underside. 

It is a good idea to use Guardian Wood Cleaner (Guardian Wood Cleaner) before treating with Guardian Wood Soap White-Pigmented. It is recommended that soap-treated furniture is treated with Guardian Wood Soap 4-6 times a year. Shake the product before use. Always test the product on a non-visible spot before use.

Guardian Wood Oil is used for maintenance and oiling of untreated and oiled furniture in hardwoods such as beech, oak, ash, cherry, mahogany, teak, walnut and similar. The oil is based on the finest and purest oils, has a water-repellent effect and protects the wood from drying out. 

Apply the oil with a soft, lint-free cloth or a soft sponge in an even, thin layer in the grain direction of the wood. It is recommended that entire surfaces are always treated. The oil has minimal evaporation and should therefore be used sparingly so that the wood can absorb the amount of oil applied. Remove any excess oil with a dry cloth after approx. 4 minutes. The final drying time is approximately 24 hours. Repeat the treatment if the wood does not appear saturated. If treating solid worktops, the treatment should be applied to both the top and underside. 

It is a good idea to use Guardian Wood Cleaner before treating with Guardian Wood Oil. It is recommended to oil wooden furniture 3-4 times a year. Shake the product before use. Always test the product on a non-visible spot before use.

Guardian White-Pigmented Wood Oil is used for oiling untreated wood where a white pigment is desired or for the care of already white-pigmented oiled wood. The oil is based on the finest and purest oils, has a water-repellent effect and protects the wood from drying out. 

Apply the oil with a soft, lint-free cloth or a soft sponge in an even, thin layer in the grain direction of the wood. It is recommended that entire surfaces are always treated. The oil has minimal evaporation and should therefore be used sparingly so that the wood can absorb the amount of oil applied. To avoid colour bleeding, remove any excess oil with a dry cloth after 4 hours. The final drying time is approximately 24 hours.

Repeat the treatment if the wood does not appear saturated. If treating solid worktops, the treatment should be applied to both the top and underside. It is a good idea to use Guardian Wood Cleaner before treating with Guardian White-Pigmented Wood Oil. 

It is recommended to oil wooden furniture 3-4 times a year. Shake the product before use. Always test the product on a non-visible before use.

Guardian Grey-Pigmented Wood Oil is used for oiling untreated wood where a grey pigment is desired or for the care of already grey-pigmented oiled wood. The oil is based on the finest and purest oils, has a water-repellent effect and protects the wood from drying out.

Apply the oil with a soft, lint-free cloth or a soft sponge in an even, thin layer in the grain direction of the wood. It is recommended that entire surfaces are always treated. The oil has minimal evaporation and should therefore be used sparingly so that the wood can absorb the amount of oil applied. To avoid colour bleeding, remove any excess oil with a dry cloth after 4 hours. The final drying time is approximately 24 hours. 

Repeat the treatment if the wood does not appear saturated. If treating solid worktops, the treatment should be applied to both the top and underside. It is a good idea to use Guardian Wood Cleaner before treating with Guardian Grey-Pigmented Wood Oil. 

It is recommended to oil wooden furniture 3-4 times a year. Shake the product before use. Always test the product on a non-visible spot before use.

Guardian Mocha-Pigmented Wood Oil is used for oiling untreated wood where a mocha-coloured pigment is desired or for the care of already mocha-pigmented oiled wood. The oil is based on the finest and purest oils, has a water-repellent effect and protects the wood from drying out. 

Apply the oil with a soft, lint-free cloth or a soft sponge in an even, thin layer in the grain direction of the wood. It is recommended that entire surfaces are always treated. The oil has minimal evaporation and should therefore be used sparingly so that the wood can absorb the amount of oil applied. To avoid colour bleeding, remove any excess oil with a dry cloth after 4 hours. The final drying time is approximately 24 hours. 

Repeat the treatment if the wood does not appear saturated. It is a good idea to use Guardian Wood Cleaner before treating with Guardian Mocha-Pigmented Wood Oil. 

It is recommended to oil wooden furniture 3-4 times a year. Shake the product before use. Always test the product on a non-visible spot before use.

Guardian Black-Pigmented Wood Oil is used for oiling untreated wood where a black-coloured pigment is desired or for the care of already black-pigmented oiled wood (smoked oak coloured). The oil is based on the finest and purest oils, has a water-repellent effect and protects the wood from drying out. 

Apply the oil with a soft, lint-free cloth or a soft sponge in an even, thin layer in the grain direction of the wood. It is recommended that entire surfaces are always treated. The oil has minimal evaporation and should therefore be used sparingly so that the wood can absorb the amount of oil applied. To avoid colour bleeding, remove any excess oil with a dry cloth after 4 hours. The final drying time is approximately 24 hours. 

Repeat the treatment if the wood does not appear saturated. It is a good idea to use Guardian Wood Cleaner before treating with Guardian Black-Pigmented Wood Oil. 

It is recommended to oil wooden furniture 3-4 times a year. Shake the product before use. Always test the product on a non-visible spot before use.

Guardian Wood Oil with wax is for maintenance and oiling of untreated and oiled furniture and can be used on all types of wood. The oil has a water-repellent effect, protects the wood from drying out and gives the wood a silky, deeper glow. 

Apply the oil with a soft, lint-free cloth or a soft sponge in an even, thin layer in the grain direction of the wood. It is recommended that entire surfaces are always treated. Remove any excess oil with a dry, lint-free cloth after approx. 30 minutes. The final drying time is approximately 6 hours. Repeat the treatment if the wood does not appear saturated. If treating solid worktops, the treatment should be applied to both the top and underside. 

It is a good idea to use Guardian Wood Cleaner before treating with Guardian Wood Oil with wax. It is recommended to oil wooden furniture 3-4 times a year. Shake the product before use. Always test the product on a non-visible spot before use.

Guardian Spray Wax can be used where a wax treatment is desired on untreated, waxed and varnished wood surfaces regardless of the type of wood. 

Spray the product onto the surface at a distance of approx. 25 cm in a uniform thin layer and let the product rest (varnished surfaces approx. 2 minutes, untreated and wax-treated surfaces approx. 30 minutes). Afterwards polish the surface with a dry clean lint-free cloth - never use a paper towel! It is recommended that entire surfaces are always treated. 

For use on non-varnished wooden surfaces, Guardian Wood Cleaner can be used before treating with Guardian Spray Wax. Shake the product before use. Always test the product on a non-visible spot before use.

Guardian Beeswax can be used on all untreated or waxed wood surfaces where a beeswax surface is desired. In some cases, it can also be used on absorbent stone types and fibre cement. 

Start by wiping the surface with a soft, lint-free cloth, wrung in clean water. Then apply the wax with a soft, lint-free cloth or a soft sponge in an even, thin layer. Always treat wooden furniture in the grain direction of the wood. It is recommended that entire surfaces are always treated. 

Allow the wax to dry for approx. 30 minutes and then polish the surface with a dry, lint-free cloth. If treating solid worktops, the treatment should be applied to both the top and underside. 

For wooden furniture, it is a good idea to use Guardian Wood Cleaner before treating with Guardian Beeswax. It is recommended to use Guardian Beeswax 3-4 times a year. Always test the product on a non-visible spot before use

Guardian Light Wax is specially developed for the care of light untreated or waxed woods and for acid-washed oak. The wax nourishes the wood, deepens the colour, repels water and protects the wood from drying out. 

Start by wiping the furniture surface with a soft lint-free cloth, hard-wrung in clean water, in the grain direction of the wood. Apply the wax with a soft, lint-free cloth or a soft sponge in an even, thin layer in the grain direction of the wood. It is recommended that entire surfaces are always treated. 

Allow the wax to dry for approx. 30 minutes and then polish the surface with a dry, lint-free cloth. If treating solid worktops, the treatment should be applied to both the top and underside. 

It is a good idea to use Guardian Wood Cleaner before treating with Guardian Light Wax. It is recommended to use Guardian Light Wax 3-4 times a year. Always test the product on a non-visible before use.

Guardian Dark Wax is specially developed for the care of dark wood or dark stained wood. The wax nourishes the wood, gives the wood a uniform surface, acts as a water repellent, protects the wood from drying out and will in many cases remove "white rings". 

Start by wiping the furniture surface with a soft lint-free cloth, hard-wrung in clean water, in the grain direction of the wood. Apply the wax with a soft, lint-free cloth or a soft sponge in an even, thin layer in the grain direction of the wood. It is recommended that entire surfaces are always treated. 

Allow the wax to dry for approx. 30 minutes and then polish the surface with a dry, lint-free cloth. If treating solid worktops, the treatment should be applied to both the top and underside. It is a good idea to use Guardian Wood Cleaner before treating with Guardian Dark Wax. 

It is recommended to use Guardian Dark Wax 3-4 times a year. Always test the product on a non-visible spot before use.

Guardian Furniture Polish is designed to care for glossy, lacquered surfaces in all types of wood. Guardian Furniture Polish cleans, removes minor scratches and protects the surface. 

Apply Guardian Furniture Polish in circular motions with a soft lint-free cloth or a soft sponge in a uniform thin layer and allow to dry for approx. 15 minutes. It is recommended that entire surfaces are always treated. 

Then polish the surface firmly with a dry, soft, lint-free cloth. Shake the product before use. Always test the product on a non-visible spot before use.

Guardian Varnish Wash is specially developed to clean, care for and protect matt varnished surfaces and can be used on all types of wood. Guardian Varnish Wash is ready-mixed and ready to use. The product is water-based and contains no solvents. 

Apply Guardian Varnish Wash in the grain direction of the wood with a soft, lint-free cloth and let it "rest" for approx. 2 minutes.

It is recommended that entire surfaces are always treated. Then wipe with a hard-wrung, soft, lint-free cloth to remove any excess product. 

Allow the treated area to dry at normal room temperature. Shake the product before use. Always test the product on a non-visible spot before use.

Guardian Laminate Cleaner can be used on all types of laminate, where it cleans, degreases and can remove many stains. 

Spray the product onto the surface from a distance of approx. 25 cm in a uniform thin layer and let it "rest" for approx. 2 minutes, then wipe and polish with a dry, soft, lint-free cloth – never use a paper towel. 

It is recommended that entire surfaces are always treated. Shake the product before use. Always test the product on a non-visible before use.

Guardian Linoleum Soap is specially developed to both clean and protect linoleum surfaces. Linoleum is a natural product that requires thorough and regular care to maintain its natural properties. 

Apply Guardian Linoleum Soap to the surface with a soft lint-free cloth in an even thin layer and let it "rest" for about 5 minutes. It is recommended that entire surfaces are always treated. Then wash the surface in circular motions with a soft, lint-free cloth wrung in clean water to create a light foam. Follow by wiping with a soft, lint-free cloth, hard-wrung in clean water and allow the surface to dry. 

It is recommended that furniture with linoleum surfaces be treated with Guardian Linoleum Soap 3-4 times a year. Shake the product before use. Always test the product on a non-visible spot before use.

Guardian Stone Sealer is specially developed to protect porous and open (absorbent) stone types such as granite, marble, terrazzo, slate, fibre cement, concrete and similar types. The product provides an invisible impregnation and can be used both indoors and outdoors. 

Apply Guardian Stone Sealer with a soft lint-free cloth or a soft sponge in a uniform thin layer and allow it to dry. It is recommended that entire surfaces are always treated. Furniture with stone surfaces should be treated with Guardian Stone Sealer 3-4 times a year. 

Shake the product before use. Always test the product on a non-visible spot before use.

Guardian Stone Oil is used to protect all untreated and oiled absorbent stone types such as granite, marble, terrazzo, slate, fibre cement, concrete and similar types. Guardian Stone Oil penetrates the stone and gives a beautiful, deeper glow. Can be used both indoors and outdoors. 

Apply Guardian Stone Oil with a soft, lint-free cloth or a soft sponge in an even, thin layer. Allow to dry for approx. 20 minutes and then polish the surface with a dry, lint-free cloth. 

It is recommended that entire surfaces are always treated. Furniture with stone surfaces should be treated with Guardian Stone Oil 3-4 times a year. Shake the product before use. Always test the product on a non-visible spot before use.

Guardian G-Polish is specially developed for the maintenance of non-absorbent polished and glossy lacquered stone surfaces and high-gloss lacquered surfaces. Can be used both indoors and outdoors. The product cleans, polishes and protects the surface. 

Apply Guardian G-Polish in circular motions with a soft lint-free cloth or a soft sponge in a uniform thin layer and allow to dry for approx. 15 minutes. 

It is recommended that entire surfaces are always treated. Then polish the surface firmly with a dry, soft, lint-free cloth. Shake the product before use. Always test the product on a non-visible before use.

Guardian Steel Cleaner cleans and protects stainless steel and other metal surfaces from oxidisation and corrosion and removes stains, fingerprints and grease. 

Spray the product onto the surface from a distance of approx. 25 cm and let it "rest" for approx. 1 minute, then polish the surface with a dry, clean and lint-free cloth - never use a paper towel. 

It is recommended that entire surfaces are always treated. For very dirty surfaces, it may be necessary to repeat the treatment. Shake the product before use. Always test the product on a non-visible spot before use.

Guardian Outdoor Wood Oil is specially developed for oiling outdoor wooden furniture. The oil protects the wood from drying out and gives the wood a beautiful, deeper glow. The risk of mould and mildew is significantly minimised by regular oiling with Guardian Outdoor Wood Oil. 

Apply the oil with a brush, a soft lint-free cloth or a soft sponge in a uniform thin layer in the grain direction of the wood. It is recommended that entire surfaces are always treated. Remove any excess oil with a dry, lint-free cloth after approx. 15 minutes. Do not apply the oil in direct sunlight. 

Repeat the treatment if the wood does not appear saturated. If treating solid worktops, the treatment should be applied to both the top and underside. Wooden garden furniture should be treated with Guardian Outdoor Wood Oil 2-4 times during the season. 

It is a good idea to use Guardian Outdoor Wood Cleaner before treating with Guardian Outdoor Wood Oil. Shake the product before use. Always test the product on a non-visible before use.

Guardian Outdoor Wood Cleaner is designed to clean dirty, grey and mildewy outdoor wood and to eliminate mould and mildew. Mix 0.5 litres of Guardian Outdoor Wood Cleaner with 1 litre of warm water (approx. 30°). 

Apply the mixture sparingly to the wood with a soft brush, a soft lint-free cloth or a soft sponge and then scrub in the grain direction of the wood with a stiff brush. Use cleaning gloves. It is recommended that entire surfaces are always treated. 

Let the mixture "rest" for about 10 minutes and rinse the wood thoroughly with clean water. When the wood is completely dry, if the wood has risen and become rough, sand lightly in the grain direction with fine sandpaper. 

After using Guardian Outdoor Wood Cleaner, the wood should be treated with Guardian Outdoor Wood Oil. Wooden garden furniture should be treated 2-4 times during the season. Shake the product before use. Always test the product on a non-visible spot before use.

Guardian Poly Wash is specially developed for cleaning and caring for garden furniture in polyrattan, "Non-Wood" and similar materials. Guardian Poly Wash contains cleansing soap and nourishing wax that cleans and protects so that algae and other dirt do not settle in the material and degrade the furniture. Mix 0.2 litres of Guardian Poly Wash with 5 litres of warm water (approx. 30°). 

Wash the furniture with the mixture using a soft brush or a soft sponge and let it "rest" for about 2 minutes. It is recommended that entire surfaces are always treated. 

Afterwards, rinse the furniture with clean water. Garden furniture made of polyrattan should be treated with Guardian Poly Wash 2-4 times during the season. Shake the product before use. Always test the product on a non-visible spot before use.